楼主,请教一下,我开出来的硬盘,有错误信息,关系大不大 ? 通电时间23233小时。东芝P300硬盘。
- SMART Error Log Version: 1
- ATA Error Count: 49 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 49 occurred at disk power-on lifetime: 18022 hours (750 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 90 c3 14 07 Error: WP at LBA = 0x0714c390 = 118801296
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 b0 08 40 c1 53 40 00 10:20:53.743 WRITE FPDMA QUEUED
- 60 08 00 90 c3 14 40 00 10:20:53.743 READ FPDMA QUEUED
- 61 08 f0 38 5b d3 40 00 10:20:53.742 WRITE FPDMA QUEUED
- 61 18 c8 a8 20 5a 40 00 10:20:53.742 WRITE FPDMA QUEUED
- 61 10 70 e8 6a 10 40 00 10:20:53.742 WRITE FPDMA QUEUED
- Error 48 occurred at disk power-on lifetime: 18022 hours (750 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 90 c3 14 07 Error: UNC at LBA = 0x0714c390 = 118801296
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 50 90 c3 14 40 00 10:20:49.845 READ FPDMA QUEUED
- 60 08 48 08 bf 14 40 00 10:20:49.845 READ FPDMA QUEUED
- 60 08 40 40 c1 14 40 00 10:20:49.845 READ FPDMA QUEUED
- 60 08 38 a0 be 14 40 00 10:20:49.845 READ FPDMA QUEUED
- 60 08 30 a8 bf 14 40 00 10:20:49.845 READ FPDMA QUEUED
- Error 47 occurred at disk power-on lifetime: 18022 hours (750 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 88 c3 14 07 Error: WP at LBA = 0x0714c388 = 118801288
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 a0 00 32 46 40 00 10:20:35.790 WRITE FPDMA QUEUED
- 60 08 98 88 c3 14 40 00 10:20:33.101 READ FPDMA QUEUED
- 61 00 90 00 28 46 40 00 10:20:33.014 WRITE FPDMA QUEUED
- 61 00 88 00 22 46 40 00 10:20:32.904 WRITE FPDMA QUEUED
- 61 00 80 00 18 46 40 00 10:20:32.791 WRITE FPDMA QUEUED
- Error 46 occurred at disk power-on lifetime: 18022 hours (750 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 88 c3 14 07 Error: UNC at LBA = 0x0714c388 = 118801288
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 70 88 c3 14 40 00 10:20:28.440 READ FPDMA QUEUED
- 60 08 68 c8 c4 14 40 00 10:20:28.421 READ FPDMA QUEUED
- 60 08 60 60 c1 14 40 00 10:20:26.919 READ FPDMA QUEUED
- 61 e0 58 00 98 45 40 00 10:20:26.840 WRITE FPDMA QUEUED
- 61 00 50 00 92 45 40 00 10:20:26.679 WRITE FPDMA QUEUED
- Error 45 occurred at disk power-on lifetime: 18022 hours (750 days + 22 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 80 c3 14 07 Error: WP at LBA = 0x0714c380 = 118801280
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 00 e8 00 d2 44 40 00 10:20:22.758 WRITE FPDMA QUEUED
- 61 08 e0 a8 59 93 40 00 10:20:22.750 WRITE FPDMA QUEUED
- 61 00 d8 00 c8 44 40 00 10:20:20.369 WRITE FPDMA QUEUED
- 61 e8 d0 98 bf 53 40 00 10:20:20.369 WRITE FPDMA QUEUED
- 60 08 c8 80 c3 14 40 00 10:20:20.368 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
复制代码 |